AIR TECHNOLOGY AUSTRALIA PTY LTD

Chillers Designed for Performance and Reliability

Climaveneta Chillers are designed with Performance and Reliability at the forefront. Not only are the best components selected and used but every Chiller as it rolls off the assembly line is tested in the Environmental Chamber at the end of each production line. The chamber can be made to reproduce the conditions at which the Chiller has been selected to perform so if your order calls for an ambient temperature of 42 degrees C the Chiller is subjected to this ambient as part of the Quality Control procedures. In addition to this every Chiller is Eurovent Certified so you can have complete confidence in all aspects of performance including noise levels

Climaveneta Environmental Test Chamber

Climaveneta Chillers have been successfully installed and operated on a number of sites and in different applications here in Australia over the last three years. The applications include High Rise CBD Office Towers, University Campuses, Registered Clubs, 5 Star Hotels, Government Office Buildings, Gold Mines and Computer Data Centres.

Production Line Climaveneta Italy

Installed machines include Water and Air Cooled versions and the majority are connected to the building management system for integrated control of building cooling functions.

     Data Centre Canberra

             Registered Club Sydney

    CBD Tower Adelaide

               CBD Tower Adelaide

    Hotel Canberra

             Supermarket Sydney

 Supermarket Sydney

Climaveneta Chillers have been applied to Chilled Beam applications where Chilled Water at 14 degrees Celsius supply temperature is required and the resulting Coefficient of Performance or IPLV Rating of the Chiller is much higher than at the normal operating temperatures of 6 or 7 degrees used with conventional air conditioning resulting in greater energy efficiency and lower operating costs for the building.

Chiller Variations and Accessories

Climaveneta Chillers are available with a complete range of model variations and accessories. Most Chiller designs are available with options including:

•     Low Noise Treatment - LN

•     Super Low Noise Treatment - SL

•     Extra Low Noise - XL

•     High Temperature Versions - HT

•     Higher Efficiency Versions - CA

•     Inverter Drive Screw Compressor Models - iFocs

•      "Free Cooling" Models - FC

•     Reversible Heat Pump Models with Total Heat Recovery - Air/Water

•     Reversible Heat Pump Models with Total Heat Recovery - Water/Water

•     Oil Free Magnetic Bearing Integral Speed Control Centrifugal Chillers

Accessories include:

•     High Level Interface Communications Options like Bacnet, Modbus and Lonworks and others

•     Hydronic Kits with Pump/s, Filters and Controls integrated

•     Variable Fan Speed Control and Low Ambient Temperature Controls

•     Coil anti corrosion Treatment and Physical Protection grilles

•     Pump Control Relays and Compressor Control alternatives

•     Hydrostatic Valves

•     Copper/Copper Coils

•     Compressor Shut Off Valves

•     Electronic Expansion Valves

The list of Accessories shown is by no means exhaustive and many other options and accessories are available - please enquire if you require any items not shown here.

Typical Small Chiller Hydronic Kit

Air Technology Australia has the experience to put together matching Chilled Beam and Chiller Packages to deliver optimum performance and energy savings for your project from small to large kW cooling loads.

    Your Air Movement Partner

Copyright © 2009 Air Technology Australia Pty Ltd